Routines
| Prev: C628 | Up: Map | Next: C74E |
C6BE: Check the indirect object against the action record's requirement
|
As C628, for the indirect object and the low nibble of byte 1 ($A010). C6B8 sets $A021 = 1 (the indirect object is being checked); C654 sets it to 0.
How it works:
1. Take the indirect object's requirement code from the low nibble of byte 1 of the record. Zero means no requirement: pass.
2. Codes 5 and 6 want a number (the parser's number marker is $FE, the value in $A031): code 5 needs bit 7 of the value clear, code 6 needs it set.
3. Codes 1 and 2 want a room whose record has bit 7 of its first byte set; codes 1 and 3 also want the room to be next door to the actor (D471).
4. Codes 7 to 15 are handed to C7A6 along with the object's id, which is also stored at $CB7A so that a refusal can name it.
5. A failure there sets $A021 and refuses.
|
||||||||||||
| C6BE | LD A,(IY+$01) | Read byte +1 of the record at IY into A - The requirement code: the low nibble of the record's byte 1; 0 needs nothing | ||||||||||
| C6C1 | AND $0F | Keep only bits 0, 1, 2, 3 of A (mask $0F) | ||||||||||
| C6C3 | JR NZ,$C6CB | If any of bits 0, 1, 2, 3 of A was set, skip ahead to C6CB | ||||||||||
| C6C5 | OR $01 | Make A non-zero, which clears the zero flag, and hand that back to the caller - Pass: NZ | ||||||||||
| C6C7 | RET | Return to the caller | ||||||||||
| C6C8 | JP $DC15 | Refuse | ||||||||||
| C6CB | CP $05 | Compare A with $05 - Codes 5 and 6: a number | ||||||||||
| C6CD | JR C,$C6F5 | If A is below $05, skip ahead to C6F5 | ||||||||||
| C6CF | CP $07 | Compare A with $07 | ||||||||||
| C6D1 | JR NC,$C719 | If A is $07 or more, jump on to C719 | ||||||||||
| C6D3 | LD A,($A035) | Read $A035 in "Game variables" into A - It must be a number ($FE), its value at $A031... | ||||||||||
| C6D6 | CP $FE | Compare A with $FE | ||||||||||
| C6D8 | JP NZ,$C654 | If A differs from $FE, go back to C654 | ||||||||||
| C6DB | LD HL,($A031) | Read $A031 in "Game variables" into HL | ||||||||||
| C6DE | LD A,(IY+$01) | Read byte +1 of the record at IY into A - ...with bit 7 of its low byte clear for code 5... | ||||||||||
| C6E1 | AND $0F | Keep only bits 0, 1, 2, 3 of A (mask $0F) | ||||||||||
| C6E3 | CP $05 | Compare A with $05 | ||||||||||
| C6E5 | JR NZ,$C6EE | If A differs from $05, skip ahead to C6EE | ||||||||||
| C6E7 | BIT 7,L | Test bit 7 of L | ||||||||||
| C6E9 | JR Z,$C6C5 | If bit 7 of L is clear, go back to C6C5 | ||||||||||
| C6EB | JP $C654 | Go back to C654 | ||||||||||
| C6EE | BIT 7,L | Test bit 7 of L - ...and set for code 6 | ||||||||||
| C6F0 | JR NZ,$C6C5 | If bit 7 of L is set, go back to C6C5 | ||||||||||
| C6F2 | JP $C654 | Go back to C654 | ||||||||||
| C6F5 | CP $03 | Compare A with $03 - Codes 1 and 2: a room whose record has bit 7 of byte 0 set | ||||||||||
| C6F7 | JR NC,$C706 | If A is $03 or more, skip ahead to C706 | ||||||||||
| C6F9 | LD A,($A035) | Read $A035 in "Game variables" into A | ||||||||||
| C6FC | CALL $D224 | Call the routine "Find a room record" (D224) | ||||||||||
| C6FF | BIT 7,(IX+$00) | Test bit 7 of the first byte of the record at IX | ||||||||||
| C703 | JP Z,$C654 | If bit 7 of the first byte of the record at IX is clear, go back to C654 | ||||||||||
| C706 | BIT 0,(IY+$01) | Test bit 0 of byte +1 of the record at IY - Codes 1 and 3: and next door to the actor (D471) | ||||||||||
| C70A | JR Z,$C6C5 | If bit 0 of byte +1 of the record at IY is clear, go back to C6C5 | ||||||||||
| C70C | LD A,($A035) | Read $A035 in "Game variables" into A | ||||||||||
| C70F | CALL $D471 | Call D471 (inside "Find the exit from the actor's room through...") | ||||||||||
| C712 | CP $FF | Compare A with $FF | ||||||||||
| C714 | JP Z,$C654 | If A equals $FF, go back to C654 | ||||||||||
| C717 | JR $C6C5 | Go back to C6C5 | ||||||||||
| C719 | LD A,($A035) | Read $A035 in "Game variables" into A - Codes 7-15 (C7A6), with the object noted at $CB7A | ||||||||||
| C71C | LD ($CB7A),A | Store A in $CB7A in "The flags CB7B is to name" | ||||||||||
| C71F | LD C,A | Copy A into C | ||||||||||
| C720 | LD A,(IY+$01) | Read byte +1 of the record at IY into A | ||||||||||
| C723 | CALL $C7A6 | Call the routine "Check object C against requirement code A (7-15)" (C7A6) | ||||||||||
| C726 | RET Z | If the zero flag is set, return | ||||||||||
| C727 | BIT 4,(IY+$00) | Test bit 4 of the first byte of the record at IY - Flags bit 4: then the indirect object's +5 masks from the header (C74E) | ||||||||||
| C72B | JP Z,$C62F | If bit 4 of the first byte of the record at IY is clear, go back to C62F | ||||||||||
| C72E | LD A,(IY+$02) | Read byte +2 of the record at IY into A | ||||||||||
| C731 | LD L,(IY+$05) | Read byte +5 of the record at IY into L | ||||||||||
| C734 | LD H,(IY+$06) | Read byte +6 of the record at IY into H | ||||||||||
| C737 | BIT 6,(IY+$00) | Test bit 6 of the first byte of the record at IY - (two bytes further on when the header also has a pre-check address, bit 6) | ||||||||||
| C73B | JR Z,$C746 | If bit 6 of the first byte of the record at IY is clear, skip ahead to C746 | ||||||||||
| C73D | LD A,(IY+$04) | Read byte +4 of the record at IY into A | ||||||||||
| C740 | LD L,(IY+$07) | Read byte +7 of the record at IY into L | ||||||||||
| C743 | LD H,(IY+$08) | Read byte +8 of the record at IY into H | ||||||||||
| C746 | LD B,A | Copy A into B | ||||||||||
| C747 | CALL $C74E | Call the routine "Test object C's +5 flags against a record's masks" (C74E) | ||||||||||
| C74A | RET NZ | If the zero flag is clear, return | ||||||||||
| C74B | JP $C6B8 | The flags were wrong: $A021 = 1, and refuse | ||||||||||
| Prev: C628 | Up: Map | Next: C74E |