Routines
| Prev: BD51 | Up: Map | Next: BE5A |
BDC2: Turn the player's remark into a statement
|
The relation is the position of the remark's verb in the list at 994D; the subject and object are the first two things named (BE3C, BE4B), each copied as a 6-byte entry into $9FF6 (people) or $9FFC (things) by BE22. Carry set if the remark names more than that.
BE22 copies thing A's 6-byte entry to $9FF6 (a person, +5 bit 6) or $9FFC; BE3C and BE4B step through the parser's object slots at $B172 and $B178.
How it works:
1. Start both searches at the top of the thing index (D04F).
2. Look the remark's verb word up in the list of relation words at 994D. Its position in that list (counting from 1) is the statement's relation. If it is not there the remark is not a statement: return Z.
3. Allow things that are not in the room to be named ($A038 = 2).
4. Find the thing that matches the subject words (BE3C). None means it is not a statement. A second match means the subject is ambiguous: return carry. Otherwise remember it and copy its six-byte entry to $9FF6 if it is a person or $9FFC if not (BE22), so that HE, IT and THEY can refer to it later.
5. Do the same for the object words (BE4B).
|
||||||||||||||
| BDC2 | CALL $D04F | Call the routine "IX = just before the start of the thing index (8B6F)" (D04F) - Both searches start at the top of the thing index | ||||||||||||
| BDC5 | LD ($BA13),IX | Store IX in "Variables used by the code at BA20-BF58" (BA13) | ||||||||||||
| BDC9 | LD ($BA15),IX | Store IX in $BA15 in "Variables used by the code at BA20-BF58" | ||||||||||||
| BDCD | LD DE,($BA17) | DE = the remark's verb word | ||||||||||||
| BDD1 | LD HL,$994D | Point HL at "The case's relation words" (994D) - Find it in the list of relation words at 994D (B counts from 1) | ||||||||||||
| BDD4 | LD B,$01 | Load B with $01 | ||||||||||||
| BDD6 | LD A,(HL) | Read the byte HL points at into A | ||||||||||||
| BDD7 | INC HL | Step HL on to the next byte | ||||||||||||
| BDD8 | OR (HL) | Set in A the bits that are set in the byte HL points at | ||||||||||||
| BDD9 | DEC HL | Step HL back one byte | ||||||||||||
| BDDA | RET Z | If the result is zero, return - Not there (the list ends with 0): not a statement (Z) | ||||||||||||
| BDDB | LD A,E | Copy E into A | ||||||||||||
| BDDC | CP (HL) | Compare A with the byte HL points at | ||||||||||||
| BDDD | JR NZ,$BDE5 | If A differs from the byte HL points at, skip ahead to BDE5 | ||||||||||||
| BDDF | INC HL | Step HL on to the next byte | ||||||||||||
| BDE0 | LD A,D | Copy D into A | ||||||||||||
| BDE1 | CP (HL) | Compare A with the byte HL points at | ||||||||||||
| BDE2 | DEC HL | Step HL back one byte | ||||||||||||
| BDE3 | JR Z,$BDEA | If A equals the byte HL points at, skip ahead to BDEA | ||||||||||||
| BDE5 | INC HL | Step HL on to the next byte | ||||||||||||
| BDE6 | INC HL | Step HL on to the next byte | ||||||||||||
| BDE7 | INC B | Add one to B | ||||||||||||
| BDE8 | JR $BDD6 | Go back to BDD6 | ||||||||||||
| BDEA | LD A,B | Copy B into A - Its position is the relation | ||||||||||||
| BDEB | LD ($BA1A),A | Store A in $BA1A in "Variables used by the code at BA20-BF58" | ||||||||||||
| BDEE | LD A,$02 | Load A with $02 - The things named need not be here ($A038 = 2) | ||||||||||||
| BDF0 | LD ($A038),A | Store A in $A038 in "Game variables" | ||||||||||||
| BDF3 | CALL $BE3C | Call BE3C (inside "Turn the player's remark into a statement") - The first thing matching the subject words | ||||||||||||
| BDF6 | CP $FF | Compare A with $FF | ||||||||||||
| BDF8 | RET Z | If A equals $FF, return - None: not a statement | ||||||||||||
| BDF9 | LD ($BA19),A | Store A in $BA19 in "Variables used by the code at BA20-BF58" | ||||||||||||
| BDFC | CALL $BE3C | Call BE3C (inside "Turn the player's remark into a statement") - More than one: carry (which one is meant?) | ||||||||||||
| BDFF | CP $FF | Compare A with $FF | ||||||||||||
| BE01 | JR NZ,$BE3A | If A differs from $FF, jump on to BE3A | ||||||||||||
| BE03 | LD A,($BA19) | Read $BA19 in "Variables used by the code at BA20-BF58" into A - Copy the subject's entry | ||||||||||||
| BE06 | CALL $BE22 | Call BE22 (inside "Turn the player's remark into a statement") | ||||||||||||
| BE09 | CALL $BE4B | Call BE4B (inside "Turn the player's remark into a statement") - The same for the object words | ||||||||||||
| BE0C | CP $FF | Compare A with $FF | ||||||||||||
| BE0E | RET Z | If A equals $FF, return | ||||||||||||
| BE0F | LD ($BA1B),A | Store A in BA1B in "Variables used by the code at BA20-BF58" | ||||||||||||
| BE12 | CALL $BE4B | Call BE4B (inside "Turn the player's remark into a statement") | ||||||||||||
| BE15 | CP $FF | Compare A with $FF | ||||||||||||
| BE17 | JR NZ,$BE3A | If A differs from $FF, skip ahead to BE3A | ||||||||||||
| BE19 | LD A,($BA1B) | Read BA1B in "Variables used by the code at BA20-BF58" into A | ||||||||||||
| BE1C | CALL $BE22 | Call BE22 (inside "Turn the player's remark into a statement") | ||||||||||||
| BE1F | OR $01 | Make A non-zero, which clears the zero flag, and hand that back to the caller - Succeed (NZ) | ||||||||||||
| BE21 | RET | Return to the caller | ||||||||||||
| BE22 | CALL $D237 | Call the routine "Resolve an id (in A) to its full entity record" (D237) - HL = the thing's record | ||||||||||||
| BE25 | PUSH IX | Save IX on the stack | ||||||||||||
| BE27 | POP HL | Restore HL from the stack | ||||||||||||
| BE28 | BIT 6,(IX+$05) | Test bit 6 of byte +5 of the record at IX - A person (+5 bit 6) goes to $9FF6, anything else to $9FFC | ||||||||||||
| BE2C | LD DE,$9FF6 | Point DE at $9FF6 in "Game variables" | ||||||||||||
| BE2F | JR NZ,$BE34 | If bit 6 of byte +5 of the record at IX is set, skip ahead to BE34 | ||||||||||||
| BE31 | LD DE,$9FFC | Point DE at $9FFC in "Game variables" | ||||||||||||
| BE34 | LD BC,$0006 | Load BC with $0006 - Copy six bytes | ||||||||||||
| BE37 | LDIR | Copy BC bytes from where HL points to where DE points, counting up | ||||||||||||
| BE39 | RET | Return to the caller | ||||||||||||
| BE3A | SCF | Set the carry flag for the caller - Carry: ambiguous | ||||||||||||
| BE3B | RET | Return to the caller | ||||||||||||
| BE3C | LD IX,($BA13) | Read "Variables used by the code at BA20-BF58" (BA13) into IX - Next thing matching the subject slot ($B172) | ||||||||||||
| BE40 | LD HL,$B172 | Point HL at $B172 in "Parser variables" | ||||||||||||
| BE43 | CALL $D36A | Call the routine "Find the next thing that matches a word slot of the..." (D36A) | ||||||||||||
| BE46 | LD ($BA13),IX | Store IX in "Variables used by the code at BA20-BF58" (BA13) | ||||||||||||
| BE4A | RET | Return to the caller | ||||||||||||
| BE4B | LD IX,($BA15) | Read $BA15 in "Variables used by the code at BA20-BF58" into IX - Next thing matching the object slot ($B178) | ||||||||||||
| BE4F | LD HL,$B178 | Point HL at $B178 in "Parser variables" | ||||||||||||
| BE52 | CALL $D36A | Call the routine "Find the next thing that matches a word slot of the..." (D36A) | ||||||||||||
| BE55 | LD ($BA15),IX | Store IX in $BA15 in "Variables used by the code at BA20-BF58" | ||||||||||||
| BE59 | RET | Return to the caller | ||||||||||||
| Prev: BD51 | Up: Map | Next: BE5A |